The composite co-extruded dispenser is suitable for a variety of polymer materials and is used in conjunction with an extrusion flat mould. It can be uniformly extruded into films, sheets and sheet products according to the customer's delamination requirements. According to the applicable raw materials and use conditions, there are mandrel type, block type, and can be selected according to the form of leaf, and the number of composite layers that can be processed by changing the order of the composite layers by changing the layered sorting axis at the feed. From 2 layers to layer bases to more.
Hollow sun panel moulds are widely used in the fields of architectural decoration, lighting and insulation, and barriers. The hollow sun plate mould is equipped with a uniform coating of the UV layer. It can produce hollow products with a width of 2100mm. It has excellent resistance to resistance, UV resistance, new impact resistance and light transmittance.
The mould has upper and lower elastic fine adjustment lateral lip to adjust the product wall thickness error of ￡3%; fully enclosed built-in electric heating tube partition control, rapid heating, small temperature difference; in-mould blowing mechanism independent partition control flow, uniform gas distribution More stable; cross-adhesive and mandrel with precision polishing process with precision up to 0.015-0.03um to ensure smooth material
Different structural design adapts to various product requirements. The thickness of general-purpose solar panels ranges from 4-25mm. The multi-layer structural panels include H-shaped and X-shaped structures. The thickness can reach more than 36mm, and the anti-ultraviolet layer can be coated on both sides.
PP and PE hollow grid plates produced by special cross-belt are suitable for totes, light box advertisements, fabric materials, etc. due to their light weight, high strength and moisture resistance. The thickness of the products ranges from 2-12mm to 1200-2200mm.
